Why Buy Your Wallpaper from Erdecoshop?
You will live with your wallpaper for years, so we advise you before you buy. As an authorised retailer of Zambaiti Parati in Germany, we source our goods directly from the manufacturer. Tell us what you would like to know: whether the design suits your room, which surfaces it works on, or whether it is in stock. If you like, we will send you a video of the wallpaper on WhatsApp so you can judge colour and texture first.
Ask a Question About This Product
- Stock: In Stock
- Brand: Vitrulan
- Product Code: Active Reno 938 RW AQ - 200859
- Weight: 6.13kg
- Measurements: 1.00m x 25.00m
Wall renovation without stopping operations
SYSTEXX Active Reno is a range of glass fibre wallcoverings developed specifically for fast interior renovation – even while the building remains in use. The special weave pattern of the 938 range conceals surface irregularities, trowel marks and texture up to 2 mm directly, eliminating the need for repeated filling and sanding.
The AQ variants (Aqua Technology) come with adhesive already applied to the reverse side at the factory: simply pull through the Aqua Quick device, activate with water – and the fabric is ready to hang in around 3 minutes. No mixing, no mess, no separate adhesive. Ideal for high-traffic spaces such as hospital corridors, schools and hotels.
New: Reno Smooth PG AQ – the solution for smooth walls. A texture-free, smooth surface is achieved with no filling or sanding whatsoever. The glass fleece can be painted directly; over-wallpapering is possible but not required.
💡 With the PG variant, a single coat of paint is sufficient for light shades – saving both time and material in one step.
Benefits
✅ Minimal substrate preparation – irregularities up to 2 mm (938) or 1 mm (Smooth) concealed directly
✅ Renovation without disrupting operations – minimal downtime, even in high-traffic areas
✅ Aqua Technology (AQ) – factory-applied adhesive: water-activate and hang within 20 minutes
✅ NEW: Reno Smooth – smooth, texture-free walls without any filling or sanding; paintable immediately
✅ Pre-primed (PG) – one coat of paint sufficient for light shades
✅ Direct over-wallpapering – on existing glass fibre wallcovering, textured plaster, tiled or trowelled surfaces and many other substrates
✅ Crack-bridging – conceals existing wall cracks up to approx. 2 mm
✅ Crack-reinforcing – permanently stabilises the substrate
✅ Fire-retardant (B-s1, d0) – certified to DIN EN 13501-1:2010
✅ OEKO-TEX Class 1 – highest safety level
✅ Very low VOC emissions – indoor air quality class A+
✅ Disinfectant-resistant – in combination with suitable coating systems
✅ Free from harmful substances, suitable for allergy sufferers
✅ Repaintable multiple times
OEKO-TEX Class 1 certified
PG: one coat for light shades.
Installation of SYSTEXX Active Reno
938 RW – Classic method with dispersion adhesive:
Apply dispersion adhesive evenly to the wall using a paint roller or airless spray equipment. Recommended adhesive quantity: 200 – 350 g/m². Can also be applied via a wallpapering machine (follow dilution instructions). Drying time: 12–24 hours at 18 °C / 60 % RH.
938 RW AQ / 938 PG AQ / Smooth PG AQ – Aqua Technology:
Pull the material through the water-filled Aqua Quick device as instructed and fold in closed loops. The factory-applied adhesive activates in approx. 3 minutes (walls) or approx. 5 minutes (ceilings). Hang within max. 20 minutes of activation.
⚠️ Do not leave the material in the water bath for more than 5 minutes – prolonged immersion compromises adhesive quantity and consistency.
Butt-joining strips:
Always hang strips butt-joined – never upside down or reversed (use the reverse-side markings as a guide). Distance between two markings on the hung wall should always be 1 m. Remove any adhesive from the visible face immediately with a damp sponge.
External edges:
Lightly sand the edge with fine wet-and-dry abrasive paper (≥ P 240) – do not sand through – fold over the external corner and press bubble-free.
Coating / Painting:
Apply a high-quality emulsion paint evenly after full drying. All sheen levels may be used. PG variant: one coat is sufficient for light shades.
Areas of application:
SYSTEXX Active Reno is suitable for virtually all renovation surfaces in occupied buildings: hospitals, schools, hotels, office buildings, residential complexes and public facilities. Can be applied directly over existing glass fibre wallcovering, textured plaster, tiled or trowelled surfaces and many other load-bearing substrates.
Delivery & Shipping:
Delivery time: Your order will be dispatched within 1–3 working days of payment confirmation. Standard delivery time is 3–10 working days.
Shipping costs: Free shipping on orders over €200.
Contact & Trade:
We supply wholesale and retail throughout Germany and the EU. For projects exceeding 1,000 m², special project pricing is available.
Bulk orders for hospitals, schools, hotels, residential complexes and construction companies are welcome.
SYSTEXX Active Reno 938 – Smart Wall Renovation
Pre-adhesive-coated glass fibre wallcoverings can be installed quickly and cleanly simply by moistening – ideal for renovation in occupied buildings.
